Capstone: Airship Pressure Regulator

To see only the CAD and FEA images, click here. It is this projects section in the CAD Portfolio.

  1. Introduction and Basic Information
  2. Concept Design Phase
    1. Brainstorming Sketches
  3. Final Design
    1. Rendered Model Images

 

 

Introduction and Basic Information

I worked with Ahmad Nabi, Haoyu Huang and Yuming Zhang. This was our capstone project for MIE490, where we worked for SolarShip Inc. We created design concepts, choose one and refined it. We also gave several reports, presentations, including the final report and CAD models.

I did:

  • a lot of the concept design
  • created final CAD models and renders and animated
  • collobarated on the report

 

Concept Design Phase

Meetings with both the client and the supervisor to gain an understanding of what the client wanted and what we needed to do. I was the only one with experience using valves, so I explained to my team. I drew all of these designs as we brainstormed.

Concept Sketches

Concept Design and Brainstorming Phase
img2 img2
img2 img2
img2  

 

Final Design

Yuming, Ahmad and Haoyu did the CFD and seal, magnet, and spring calculations respectively. I calculated the offsets dimensions with a force body diagram.

Determining the Dimenions

img2 img2
img2 img2
img2 img2

Creating the Model

Cutaway View Close-Up on Offset 3 Close Up on Seal
img2 img2 img2

To make the modified body

I created a torus of what the door would cover as it rotates and a regular body Then I added the regions of the torus sticking out of the regular body
img2 img2

Final Design Renders

Fully Open, Isometric View 45 Degree Open, Back View Animation
img2 img
Exploded Views Close up on Spring and Modified Body
img img
Close up on Magnets Magnet in Closed Position Isometric View of the Magnets
img2 img2 img2

 

 

Note:

This project page is essentially just images. I need to detail our process, what we gave report/presentation-wise and more on what I did specifically.